B&B Electronics 3PCIOU1 Specifikace stáhnout pdf (Strana 26)

Installing Linux Driver Software

20 Chapter 5 Document Number 3PCI-4310m

username@computer$ dmesg | grep MIport 

[ 271.828182] B&B Electronics PCI MIport serial driver Revision: 4.5

[ 314.159265] MIport 0000:07:05:05.0: PCI INT A -> GSI 26 (level, low)

-> IRQ 26

11. [optional] If recording was started in Step 2, stop recording. The file ~/MIport.script

contains all output recorded from the terminal.

username@computer$ exit 

exit

Script done on Tue 31 Aug 2010 03:58:48 AM CDT

12. Test serial communications using gtkterm. Change the serial port under Configration

| Ports and set the port to /dev/ttyM0 (for each serial port, increment the number at the

end of the name; e.g., /dev/ttyM1).

username@computer$ gtkterm & 

13. If the driver works correctly, modify /etc/rc.local to automatically load the driver when

the operating system starts.

username@computer$ sudo gedit /etc/rc.local

Add the following code to the file (before the "exit 0" statement):

if [ -f /etc/rc.MIport ] ; then

exec /etc/rc.MIport

An example of the code to add to /etc/rc.local is in the MIport driver folder in the file

rc.local.

14. Restart the computer, and then test serial communications again with gtkterm.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 56 57

Žádné komentáře

B&B Electronics 3PCIOU1 Specifikace Strana 26