B&B Electronics Parallel Printer Card PIOC Uživatelský manuál Strana 12

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 64
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 11
GHI Electronics,LLC USBwiz User Manual
Pin-Out and Description
Pin Name Description
UART_RTS In UART mode, this pin is Ready To Send Signal.
54 SPI_MOSI
UART_CTS
In SPI mode, this pin is data input to USBwiz on SPI bus.
In UART mode, this pin is Clear To Send Signal.
55 SPI_SSEL# Select line for USBwiz in SPI mode
56 TCK Leave unconnected
57 USBwiz_RESET# Reset signal for USBwiz. USBwiz reset is required after
power up.
58 UH_CS# Chip Select. Used for USB host chip (must have a pull-up
resistor on this pin or UH_RD#)
59 VSSA Analog Ground
60 TDI Leave unconnected
61 XTAL2 Connect to 14.7456Mhz crystal
62 XTAL1 Connect to 14.7456Mhz crystal
63 VREF 3.3V reference for analog inputs
64 TDO Leave unconnected
Rev.2.27 Page 12 of 64 www.ghielectronics.com
Zobrazit stránku 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Komentáře k této Příručce

Žádné komentáře