B&B Electronics Vlinx Serial Servers ESP901E Specifikace stáhnout pdf (Strana 20)

16 Documentation Number: ESP901-2303 Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

Setting TCP/UDP Protocol

The most common protocol is TCP. The default setting is TCP and should not be

changed unless your application specifies a UDP protocol.

TCP/UDP Port

The default port number is 4000. The TCP/UDP Port defines a communication

port. In all modes of operating, Virtual COM, Direct IP, and Paired modes, both

the TCP/UDP Client and server port settings must match.

As an example the Virtual COM default setting TCP/UDP Port # 4000. If the port

# in the setup menu is changed to 4001 the Virtual COM TCP/UDP Port will

have to be changed to 4001.

The change can be made in the Device Manager of the operating system or using

the ESP901 Manager software.

Remote IP Address

The default setting is 255.255.255.255. It is recommended not to change this

setting until the application has been tested and is communicating properly. At

that point the address filtering feature of the ESP901 can be activated. Refer to

the Menu Overview section for more details.

Saving the Changes

To save the changes select the update button.

Reset the ESP901

Close the menu

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Žádné komentáře

B&B Electronics Vlinx Serial Servers ESP901E Specifikace Strana 20